Questions

Questions

Items 11 to 20 of 177 total

Show per page
  1. #374 Gavin Hunt asks about Franke Cotswold Twin Lever Sink Mixer Polished Nickel 23 Jun 2026

    What will the flow rate be if the supply pressure is 1barg. please let me know if the flow rate you quote is with both the hot and cold taps open at the same time.

    1. Teresa Day answers 25 Jun 2026

      I have emailed a flow rate chart to your email.

  2. #373 Robin asks about Franke Davos Monobloc Sink Mixer Chrome 23 Jun 2026

    Who do you use as a carrier for tap orders?

    1. Teresa Day answers 24 Jun 2026

      This particular manufacturer uses DPD but sometimes UPS

  3. #370 Anthony Johnson asks about 1810 Cascata Square Spout Sink Mixer Brushed Steel 20 Jun 2026

    Why are some images showing the lever at the side? To me it looks better forward facing -and you can then see the hot/cold markers.

    1. Teresa Day answers 23 Jun 2026

      The photo looks a little confusing! The tap handles are facing forward and the spout swivels.

  4. #366 Kate Windibank asks about Acquapuro ACQ-IFC+ Replacement Filter Cartridge 16 Jun 2026

    Looking for a replacement for an eco3 water filter, is this easy enough to swap in? Can I do it myself with r would I need a plumber. Thank you

    1. Teresa Day answers 18 Jun 2026

      Either one of acquapuro filters will do the job. You will just need to disconnect the white plastic pipework from the top of the ECO 3 filter housing and insert it into the top of one of the acquapuro filters. The inlet and outlet need to be correct, but both acquapuro filters state which is which. You will also need to change the mounting bracket but that is just a couple of screws. It is a straightforward job.

  5. #365 Christine Field asks about Elegance Mono Sink Mixer Brushed Bronze 10 Jun 2026

    Having trouble with water flow. Can i disassemble to fix?

    1. Teresa Day answers 22 Jun 2026

      If the tap was purchased through ourselves and is still under warranty, we can see if we can get you spare parts under warranty. If not, you should be able to remove the handles using an allen key on the little grub screws underneath the handles.

  6. #362 gary chapman asks about TRADITIONAL RIGID RISER RAIL WITH DIVERTER CHROME 9 Jun 2026

    I am looking for a regid riser shower kit that will fit on top of our deck mounted CHURCHMAN TRADITIONAL STYLE MIXER TAPS, to replace the current small shower head and hose that rests on a chromed cradle.

    1. Teresa Day answers 9 Jun 2026

      I can confirm that the RR/662/C is in stock and would compliment your current Churchman taps.

  7. #355 Steve Moir asks about Pulsar Twin Lever Monobloc Mixer With Swivel Spout Chrome 9 Jun 2026

    Cold tap lever has developed a lot of play 200 deg, instead of 90 deg for the hot top. Can't see how the grub screw is tighted to correct this. Thanks

    1. Teresa Day answers 9 Jun 2026

      The Pulsar uses a handle bush, which allows the handle to be positioned optimally. However, if this becomes loose, it can allow the handle to rotate beyond its intended operating range.

      I would advise you to locate the 2.5 mm Allen grub screw at the base of the handle, loosen it, reposition the handle correctly, and then re-tighten the screw.

  8. #354 Thomas O'Brien asks about Franke Sink Strainer Bowl Synthetic White 8 Jun 2026

    How muchis the Franke Strainer Bowl in euro and is there a delivery charge.I am in Southern Ireland

    1. Teresa Day answers 9 Jun 2026

      We only show our prices in UK pounds as other currencies equivalent can vary.

  9. #353 Stephen Worley asks about Amelio Sensor Pull-Out Spray Mixer Tap Brushed Nickel 4 Jun 2026

    Does this tap have a flexible pull-out nozzle - the description suggests it does but the pictures do not show this. Also, how does the sensor activation work? Thanks

    1. Teresa Day answers 9 Jun 2026

      The AML10 Amelio is a pull-out tap. The hose has a 30cm extension from the docked position. To operate: Move the handle to the desired temperature and flow position. Once set, wave in front of the sensor and the water will flow for approximately 3 minutes. The water flow can be stopped at any time by waving in front of the sensor again.
      The handle’s primary function is to control temperature and flow; it must be in the ‘open’ position for the sensor function to operate.

  10. #352 Ann asks about Franke Eiger Kitchen Sink Mixer Decor Steel 4 Jun 2026

    Do the necessary connection pipes come with the Franke Eiger tap or do I need to order anything separately? I’m replacing my current tap this is not a new install. Thanks

    1. Teresa Day answers 9 Jun 2026

      The tap will come with all necessary hoses to enable installation.

Items 11 to 20 of 177 total

Show per page