Questions
-
#13 Keith Roberts asks about Franke Eiger Kitchen Sink Mixer Chrome
Can this tap be used with the Maris 4 in 1 filter?
-
This tap cannot be used with a 4in1 tap filter
-
-
#12 Brid O’ Leary asks about Franke FilterFlow Doric Chrome
I have a Franke Doric Triflow tap since 2007, starting to drip intermittently from hot tap and starting to make a whistling sound when a toilet is flushed so I need to know will this Doric
Filterflow fit in exactly same position on worktop?-
You will be able to swap your existing Franke tap with a replacement Franke tap, as the hole size is the same.
-
-
#11 Rose asks about Franke Largo 1.5 LHSB Sink Stainless Steel (LAX 160 36-16)
Please can you advise what thickness of steel this is? Also what grade of steel and the finish of this product.
Thanks.-
In answer to your question, the stainless steel is 1mm thick and it is grade 304, 18/10 stainless steel.
-
-
#10 Philip Evelin asks about Verona SQ 3 Lever Mixer Cold Filter Tap Chrome
My Verona tap is dripping not sure if it’s the hot or cold tap or filter water tap.
Do you supply replacement fittings for this?
It is only year and half old.
Reason I’m asking is I see that it all depends on the amount of teeth on the cartridge so need the correct one.
Thank you Phil-
If you tap is dripping only after 1 and a half years, you need to replace the cartridge. The supplier offers a 5 year warranty on their taps and parts. We can sort this for you if you contact us here at Tapstore.com.
-
-
#9 Peter ryan asks about Franke Eiger Kitchen Sink Mixer Decor Steel
Great tap but why does it start to drip after two years.?
-
If you tap is dripping, this is probably due to a malfunctioning cartridge/valve which will need to be replaced. If you purchased the tap through ourselves, the cartridge/valve may be under warranty. If this is the case we can get replacement cartridge/valve for you.
-
-
#8 Cathy Lennon asks about Auva Twin Lever Sink Mixer Swivel Spout Brushed Nickel
Would this be able to be fitted on 20cm thick quartz worktop? I note the diagram says max 75 and not sure what that means.
-
The maximum worktop thickness for this product is 60mm.
-
-
#7 J. Kastner asks about Florence Side Lever Basin Mixer Chrome
Does this mixer tap swivel?
-
Thank you for your enquiry. I can confirm that the tap swivels left to right 90 degrees.
-
-
#6 Ron asks about Franke Zurich Kitchen Mixer Chrome
Is the Zurich kitchen mixer suitable for low pressure system
-
This tap can be used with a low pressure system. (5.1 litres per min hot flow rate at 0.3 bar).
-
-
#5 Adam asks about SL3 Extended Basin / Bath Spout
Is this compatible with most built in/concealed mixer taps
-
Hi, It will be as it comes with a 1/2" bsp thread on it.
-
-
#4 Anne-Marie Rose asks about PRESTIGE DELUXE MONOBLOC BASIN MIXER CHROME
Do you have atechnical drawing?
-
A specifications sheet is available and can be emailed.
-