Questions
-
#387 Denise Hunt asks about Franke Tessuto Pull-Out Nozzle Tap Brushed Brass
Is the tap PVD coated ?
-
The Franke Tessuto taps are manufactured from brass and then PVD coated.
-
-
#384 Roddy asks about PRESTIGE BATH SHOWER MIXER & KIT CHROME
Does this mixer tap come supplied with the 3/4 BSP brass fittings fitted into the hot and cold underside of tap
-
As specified in the description, this comes with Fitting - Brass 3/4" BSP .
-
-
#383 Les pillar asks about Franke Krios J Spout Low Pressure Kitchen Tap Decor Steel
Is this tap suitable for high-pressure i.e. 4 to 5 bar?
I see that you are promoting the fact that it is good for low pressure. This concerns me somewhat although I can’t imagine it would have any problems.-
Although this tap is suitable for low pressure it will also be suitable for high pressure, although, Franke do not specify what bar high pressure exactly.
-
-
#381 Mr Ian Ellis asks about Livello Sink Mixer with Pull Out Spout Chrome
KWC Livello Chrome Tap with Spray purchased in 2013 handle is sticking when changing temperature. Do you have the replacement cartridge please.
-
We only supply cartridges/valves if the product is still under warranty.
-
-
#378 Adam Burgess asks about Deck Hand Shower Set Brushed Bronze
Does this also include the pull out hose and what is the length of this? What is the finish of the hose?
-
The BRO-ANDMS hand shower set comes with a 2 piece 1.5m hose which is colour matched.
-
-
#375 Gillian Cooney asks about Franke Athena Monobloc Sink Mixer Decor Steel
The plumber has advised me to get a tap with either 1 or 2 small screws , not a large screw to attach it to underneath the sink. What are the attachments for this tap like?
-
For the installation, the fixation type is 1 bolt and a ½" water supply hose connection.
-
-
#374 Gavin Hunt asks about Franke Cotswold Twin Lever Sink Mixer Polished Nickel
What will the flow rate be if the supply pressure is 1barg. please let me know if the flow rate you quote is with both the hot and cold taps open at the same time.
-
I have emailed a flow rate chart to your email.
-
-
#373 Robin asks about Franke Davos Monobloc Sink Mixer Chrome
Who do you use as a carrier for tap orders?
-
This particular manufacturer uses DPD but sometimes UPS
-
-
#370 Anthony Johnson asks about 1810 Cascata Square Spout Sink Mixer Brushed Steel
Why are some images showing the lever at the side? To me it looks better forward facing -and you can then see the hot/cold markers.
-
The photo looks a little confusing! The tap handles are facing forward and the spout swivels.
-
-
#366 Kate Windibank asks about Acquapuro ACQ-IFC+ Replacement Filter Cartridge
Looking for a replacement for an eco3 water filter, is this easy enough to swap in? Can I do it myself with r would I need a plumber. Thank you
-
Either one of acquapuro filters will do the job. You will just need to disconnect the white plastic pipework from the top of the ECO 3 filter housing and insert it into the top of one of the acquapuro filters. The inlet and outlet need to be correct, but both acquapuro filters state which is which. You will also need to change the mounting bracket but that is just a couple of screws. It is a straightforward job.
-