Questions

Questions

Items 51 to 60 of 213 total

Show per page
  1. #365 Christine Field asks about Elegance Mono Sink Mixer Brushed Bronze 10 Jun 2026

    Having trouble with water flow. Can i disassemble to fix?

    1. Teresa Day answers 22 Jun 2026

      If the tap was purchased through ourselves and is still under warranty, we can see if we can get you spare parts under warranty. If not, you should be able to remove the handles using an allen key on the little grub screws underneath the handles.

  2. #362 gary chapman asks about TRADITIONAL RIGID RISER RAIL WITH DIVERTER CHROME 9 Jun 2026

    I am looking for a regid riser shower kit that will fit on top of our deck mounted CHURCHMAN TRADITIONAL STYLE MIXER TAPS, to replace the current small shower head and hose that rests on a chromed cradle.

    1. Teresa Day answers 9 Jun 2026

      I can confirm that the RR/662/C is in stock and would compliment your current Churchman taps.

  3. #355 Steve Moir asks about Pulsar Twin Lever Monobloc Mixer With Swivel Spout Chrome 9 Jun 2026

    Cold tap lever has developed a lot of play 200 deg, instead of 90 deg for the hot top. Can't see how the grub screw is tighted to correct this. Thanks

    1. Teresa Day answers 9 Jun 2026

      The Pulsar uses a handle bush, which allows the handle to be positioned optimally. However, if this becomes loose, it can allow the handle to rotate beyond its intended operating range.

      I would advise you to locate the 2.5 mm Allen grub screw at the base of the handle, loosen it, reposition the handle correctly, and then re-tighten the screw.

  4. #354 Thomas O'Brien asks about Franke Sink Strainer Bowl Synthetic White 8 Jun 2026

    How muchis the Franke Strainer Bowl in euro and is there a delivery charge.I am in Southern Ireland

    1. Teresa Day answers 9 Jun 2026

      We only show our prices in UK pounds as other currencies equivalent can vary.

  5. #353 Stephen Worley asks about Amelio Sensor Pull-Out Spray Mixer Tap Brushed Nickel 4 Jun 2026

    Does this tap have a flexible pull-out nozzle - the description suggests it does but the pictures do not show this. Also, how does the sensor activation work? Thanks

    1. Teresa Day answers 9 Jun 2026

      The AML10 Amelio is a pull-out tap. The hose has a 30cm extension from the docked position. To operate: Move the handle to the desired temperature and flow position. Once set, wave in front of the sensor and the water will flow for approximately 3 minutes. The water flow can be stopped at any time by waving in front of the sensor again.
      The handle’s primary function is to control temperature and flow; it must be in the ‘open’ position for the sensor function to operate.

  6. #352 Ann asks about Franke Eiger Kitchen Sink Mixer Decor Steel 4 Jun 2026

    Do the necessary connection pipes come with the Franke Eiger tap or do I need to order anything separately? I’m replacing my current tap this is not a new install. Thanks

    1. Teresa Day answers 9 Jun 2026

      The tap will come with all necessary hoses to enable installation.

  7. #351 Jane asks about Franke Davos J Monobloc Sink Mixer Chrome 3 Jun 2026

    What’s the difference between the Davos monoblock and Davos J monoblock

    1. Teresa Day answers 9 Jun 2026

      The difference is the shape of the spout.

  8. #349 Kelvin asks about Franke Atlas Neo Pull-Out Spray Tap Copper 3 Jun 2026

    is this a brushed copper effect and will the coat come off in time?

    1. Teresa Day answers 3 Jun 2026

      Yes this is a brushed copper finish. You should only clean with a clean damp cloth and not use any product on it which might affect the finish of the tap.

  9. #346 Lesley pillar asks about Franke Strainer Bowl Stainless Steel 1 Jun 2026

    Hello, I am buying a Franke bell s/steel 1.5 bowl, RH sink for a new kitchen. Do you sell a sink strainer to fit this?

    1. Teresa Day answers 2 Jun 2026

      Franke do have a strainer bowl that will fit that particular sink. 112.0461.942 will not fit either unfortunately.

  10. #345 Sujit asks about 90mm Strainer Waste Artisan Brass 31 May 2026

    Is this a 1 1/2" slotted waste suitable for a belfast sink

    1. Teresa Day answers 1 Jun 2026

      In most cases a belfast sink would take a WRPAB waste. We would need to know the thickness of the sink and the size of the waste?

Items 51 to 60 of 213 total

Show per page