1901 High Neck Pillar Taps

Taking an authentic, traditional kitchen pillar taps design as inspiration, Bristan lovingly recreated these 1901 kitchen pillar taps. As with the original, these are also cast out of solid brass with white ceramic indices and only the very finest materials have been used. But Bristan also added the best the 21st century has to offer to these 1901 pillar kitchen taps, far advanced engineering techniques.

These 1901 kitchen pillar taps are sold in pairs. They are supplied without a waste and we recommend a choice from our wastes and traps section. The total height of this kitchen tap is 180mm and its projection from centre of the body to centre of the spout is 85mm. They are supplied complete with all fittings for fixing to your kitchen sink or worktop (but not plumbing fittings) and have 50mm long threaded connections.

If you are fitting this kitchen tap to a worktop we recommend a 25mm diameter hole is drilled. For full technical details have a look at the technical image above. The Bristan 1901 high neck kitchen pillar taps are suitable for both high and low pressure water systems, we recommend a minimum operating pressure of 0.2 bar.

• UK: £7.98 (Mainland UK Only, excludes some post code - see below)
• Extended Area Deliveries: £17.95 (List of postcodes)
• Isle of Wight and the Isle of Scilly: £17.95
• All IE & BT Post Codes: £17.95
• Republic of Ireland: £17.95
• Channel Islands: £20.82 (we do not charge VAT for shipping to Jersey & Guernsey)